标题: 美标厨房家用电器溢水测试问题 [打印本页] 作者: wt1982 时间: 2010-9-16 10:11 标题: 美标厨房家用电器溢水测试问题 想问大家一下做美标溢水测试时 在什么状态下做 是平放还是倾斜测试时状态下做 + |+ x' L1 M+ f' O2 c% l + \ V( X G; w 按严酷来说 好像倾斜比较严一点 想问一下大家怎么做的 在什么状态下 好想标准是平放哦作者: ivyy 时间: 2010-9-16 10:26
平放就好了 ! c. T4 K& l5 K2 {* u/ b 9 R! C, A2 c9 H n) B倾斜放置有可能会有一些面是进不了水的作者: aojia 时间: 2010-9-17 09:44
要求平放的作者: asset509 时间: 2010-9-17 09:53
按照正常行機平放測試 5 @1 ]; e7 d6 ]. x4 \/ p& y傾斜測試一般是樣機呈45度角正常行機測試，不算必做項，要看客戶的需求或是產品所用的環境。作者: yinke 时间: 2010-9-17 10:48
blender 的做法有连个：一是the appliance was placed in a smooth bottomed shallow pan having at least twice the length and width of the bottom of the appliance being tested. The pan was filled to a depth of 1/16 inch (1.6mm) with a salt-water solution (1/2 gram of NaCl per liter of distilled water), and the appliance operated at maximum speed for 1 minute. 1 a* f2 B/ K5 ?& p r' E: N. u! r' J1 o8 Q5 b二是：the appliance was positioned as intended for normal use, cover on but fill-hole open. The liquid container of the appliance was completely filled with a salt-water solution as above and a further quantity equal to 15 percent of the capacity of the container was poured in steadily over a period of 1 minute.