标题: Sincerely suggest one corner for Industrial Control Equipment at the Product [打印本页] 作者: Andy.Yang 时间: 2010-4-22 23:10 标题: Sincerely suggest one corner for Industrial Control Equipment at the Product Hi, Dear All supervisors:
Pls kindly set a corner for industrial control equipment at the product safety certification area, the reasons are as follows:
1. Currently industrial control equipment is not covered by CCC list, but from a long run, it must be covered by the CCC list, so in order to effectively instruct the certification work of this kind of products in the future, it's should be focused on from now on.
2. Now more and more factories are begining to involve this area, especially for some high voltage and medium voltage PDS(Power Drive Systems), such as ABB, Siemens, and some other domestic companies.
3. Right now, Saving energy is a worldwide topic, and the PDS(HVD/MVD) can fulfill this object in the future.
So pls kindly consider...
Here, give a standard list related with indusrial control equipment:
1)For UL:
UL508: Industrial control equipment, not cover the inverter/converter
UL508C: Low voltage power conversion equipment
UL347A: Medium voltage power conversion equipment
UL347:High voltage power conversion equipment
2)For CE:
IEC61800-1: DC PDS
IEC61800-2ow voltage AC PDS
IEC61800-3:EMC requirements for PDS
IEC61800-4:High Voltage AC PDS
IEC61800-5-1:Safety requirements for PDS
3)For GB standards:
GB12668.1: idt IEC61800-1
GB12668.2: idt IEC61800-2
GB12668.3: idt IEC61800-3
GB_T12668.4: idt IEC61800-4
GB12668.5: idt IEC61800-5-1
....作者: Andy.Yang 时间: 2010-5-11 15:50
Why there is no any feedback from the forum management?作者: 大侠风清扬 时间: 2010-5-11 16:30
建议将目前比较热门的风能，太阳能，电池等产品及尚无归类的产品如实验室设备，工业控制器及其他工业产品，部分没有归类的元器件（定时器，温控，fuse，继电器，交流接触器等）统一建议一个版块为others。 现在家电版块内的贴子太多，很多不是家电的产品也有贴子发在那里，相应的版主又无法把这类贴子移到相应的版块。等到时机成熟再建立相应的版块。作者: Andy.Yang 时间: 2010-5-11 16:36
That's a good idea, great thanks!作者: 大侠风清扬 时间: 2010-5-11 16:50
俺们不是管理员，这个要fasten 安排滴！
ow voltage AC PDS