安规网

标题: The handles on toy scooters [打印本页]

作者: tassx    时间: 2010-2-27 10:28
标题: The handles on toy scooters
玩具踏板车手柄末端的直径是否包括弹性材料?4 s8 t( K" Q0 q4 H5 c
EN71:The handles on toy scooters shall have an end with a diameter of 40 mm or more.
1 p4 k: s1 F3 ?3 M( ~) F) W& E4 ]ISO 8124: The handlebars on toy scooters shall be protected by rounded handlebar grips or plugs of resilient material, which have a diameter of 40 mm or more when measured not more than 20 mm from the end of the grip.
作者: jason_steel    时间: 2010-3-2 09:50
那个尺寸是包括弹性材料的。
作者: kewee2    时间: 2010-3-3 11:44
包括。
作者: tassx    时间: 2010-3-4 11:57
从危险角度看,如果不把整个末端包起来,弹性材料还是没有起到缓冲作用,所以,W认为不包括这些起保护作用的弹性材料。
作者: DOCTORO    时间: 2010-3-4 12:26
如果末端没有完全包裹的话,也可以认为保护不当,按照里面的铁管计算。




欢迎光临 安规网 (http://bbs.angui.org/) Powered by Discuz! X3.2