安规网

标题: CB说明书要求 [打印本页]

作者: fendou 时间: 2010-2-24 10:04
标题: CB说明书要求
请教各位大侠,在CB认证中对说明书有什么要求?
因为我们的客人要求修改说明书尺寸,我担心减少尺寸之后字体看不清,这个有要求吗?

作者: 夜雨秋风 时间: 2010-2-24 10:15
Sufficient information shall be provided to the USER concerning any condition necessary to
ensure that, when used as prescribed by the manufacturer, the equipment is unlikely
to present a hazard within the meaning of this standard.

IEC标准里没提到对字体的要求。但UL标准里对字体的要求，见下：
²IMPORTANT SAFETY INSTRUCTIONS² and ²SAVE THESE INSTRUCTIONS²–
shall be entirely in upper case letters not less than 3/16 in (4.8 mm) high or emphasized to distinguish
them from the rest of the text. Upper case letters in the instructions shall not be less than 5/64 in (2.0 mm)
high, and lower case letters shall not be less than 1/16 in (1.6 mm) high.

作者: fendou 时间: 2010-2-24 14:00

引用第1楼夜雨秋风于2010-02-24 10:15发表的 :
Sufficient information shall be provided to the USER concerning any condition necessary to
ensure that, when used as prescribed by the manufacturer, the equipment is unlikely
to present a hazard within the meaning of this standard.

IEC标准里没提到对字体的要求。但UL标准里对字体的要求，见下：
.......

非常感谢你!

作者: foleyzheng 时间: 2010-4-13 16:54
夜雨秋风：你好，这是哪个标准号里的要求？

作者: byl77 时间: 2010-4-13 17:03
字体没有要求
关键里面必须要有明确的用户警示信息和产品的使用条件如温度范围
至于说明书的大小没有关系

作者: qj99878 时间: 2010-4-19 09:46
有要求，不过看哪家，NEMKO的要求最低，哈哈

欢迎光临安规网 (http://bbs.angui.org/)