标题: 产品内部用导线的连接器需要UL认证吗？ [打印本页] 作者: baocanger 时间: 2009-9-9 10:55 标题: 产品内部用导线的连接器需要UL认证吗？ 如题，请问IT产品内部用导线的连接器需要UL认证吗？如果要得话是强制的还是自愿的，哪位如果能提供相应的UL规范或者标准的话就太感谢了！作者: baocanger 时间: 2009-9-9 11:18
自己在UL网站上看到一些要求，如下： . B5 x# q, ] t* _( @REQUIREMENTS 2 v3 ~% M, b: wThe basic standards used to investigate products in this category are UL 20, "General-Use Snap Switches," UL 486A-486B, "Wire Connectors," UL 486C, "Splicing Wire Connectors," UL 486D, "Insulated Wire Connector Systems for Underground Use or in Damp or Wet Locations," UL 486E, "Equipment Wiring Terminals for Use with Aluminum and/or Copper Conductors," UL 498, "Attachment Plugs and Receptacles," UL 1682, "lugs, Receptacles, and Cable Connectors, of the Pin-and-Sleeve Type," and other related wiring device standards as appropriate.作者: cynthialee 时间: 2009-9-12 17:32
若IT产品申请UL的话，IT产品内部用导线的连接器是要有认证的.这要看这个"连接器"是长什么样的，才能判断所属的标准. 4 L+ E9 H6 H7 _" j# qUL无所谓强制或自愿吧,原本UL是自愿的，但是大家都申请,你的不申请的话就竞争不过人家.........作者: soyouga 时间: 2009-10-17 14:29
具体要看细则
lugs, Receptacles, and Cable Connectors, of the Pin-and-Sleeve Type," and other related wiring device standards as appropriate.