安规网

标题: EN60335-1中25.14条款电源线弯曲测试后怎么检查？ [打印本页]

---

作者: shuaijiachen    时间: 2016-12-29 22:47
标题: EN60335-1中25.14条款电源线弯曲测试后怎么检查？
家电电器做了电源线弯曲测试后，是否需要通过耐压测试来判定结果？我看到EN/IEC60335-1标准中并没明确指出要用耐压来判定，为什么很多人说需要通过耐压来判定？通过观察和试验指不行吗？如果需要进行耐压测试，那么该使用哪个标准打高压，是适用产品标准？还是适用单独的电源线标准？

---

作者: prod10    时间: 2016-12-29 22:55
应该检查线芯断裂不能超过总芯数的10%

---

作者: shuaijiachen    时间: 2016-12-29 23:05

prod10 发表于 2016-12-29 22:55
" r  H1 H: Z+ i8 {8 [应该检查线芯断裂不能超过总芯数的10%

, W  O- m0 d+ S1 W+ U除了这个要求还有其他要求呢！
The test shall not result in
–  a short circuit between the conductors, such that the current exceeds a value equal to
twice the  rated current  of the appliance;
–  a breakage of more than 10 % of the strands of any conductor;
–  separation of the conductor from its terminal;
, A, O8 `% V* [7 p–  loosening of any cord guard;
–  damage to the cord or cord guard which could impair compliance with this standard;
/ Z0 j" y2 D# Y- l! b' M–  broken strands piercing the insulation and becoming accessible.

---

作者: plmijb    时间: 2016-12-30 08:08
a short circuit between the conductors,
broken strands piercing the insulation and becoming accessible.
5 O1 F- }6 K  e) @5 E4 v1 e2 p这二条也可通过耐压来检查

---

作者: cmk1991    时间: 2017-11-29 17:14

plmijb 发表于 2016-12-30 08:08
: C' Y+ t" L- k( b7 y, E0 {. Ia short circuit between the conductors,
) `( h  g) C% z5 H, mbroken strands piercing the insulation and becoming accessi ...

- p5 y( g' ~+ }* M* C" C通过耐压如何检查呢

---

欢迎光临 安规网 (http://bbs.angui.org/)

Powered by Discuz! X3.2