邓永连 发表于 2012-5-3 17:11

DIN EN 50525标准更新内容（草稿）

协调标准（HD21和HD22）在2014年1月份需要换版为EN50525。 届时，HD21和HD22标准将作废，所涉及的所有PVC和橡胶线VDE证书将必须在此期限内完成EN50525标准更新。

站内似乎还没有说明新旧标准的差异，新标准也还没有发布。现提供以下信息，供各位参考：
（这些信息仅为草稿件，不能保证将来新标准发布时会完全一样噢）

举例： 以H03VV-F为例，需要进行的额外测试有：
cold impact at -5C( 旧标准为-15C)
增加non-compatibity test(旧标准没有此要求， 只有compatibity test）
bending test
voltage test （2000V） after bending test（旧标准在bending test后没有voltage test 的要求）

虽然新标准尚未发布，为避免项目塞车，现在即可向VDE提出申请。

DIN EN 50525-2-11 H03VV(H2)-F
Cold impact test at -5 °C
new: non-compatibility test

DIN EN 50525-2-11 H05VV(H2)-F
Cold impact test at -5 °C
new: H05VVH2-F 2 X 1,5

DIN EN 50525-2-11 H03V2V2(H2)-F
Cold impact test at -5 °C
new: non-compatibility test

DIN EN 50525-2-11 H05V2V2(H2)-F
Cold impact test at -5 °C
new: H05V2V2H2-F 2 X 1,5

DIN EN 50525-2-11 H05V2V2D3-F
Cold impact test at -5 °C
For all types: Voltage test after bending test with 2000 V
----------------------------------------------------------------------------------------------------------------------------------------
DIN EN 50525-2-12 H03VV(H2)H8-F
Cold impact test at -5 °C
new: non-compatibility test
New requirements for the marking after coiling

DIN EN 50525-2-12 H05VV(H2)H8-F
Cold impact test at -5 °C
New requirements for the marking after coiling

DIN EN 50525-2-21 H05RR-F
new: cold bending test for the insulation at -35 °C

DIN EN 50525-2-21 H05RN-F
new: cold bending test for the insulation at -35 °C
new: H05RN-F 4 x 0,75 and H05RN-F 4 x 1

DIN EN 50525-2-21 H07RN-F, H07RN-F vieladrig
new: cold bending test for the insulation at -35 °C

DIN EN 50525-2-21 H07RN8-F
new: cold bending test for the insulation at -35 °C

DIN EN 50525-2-21 H05BQ-F
no changes
DIN EN 50525-2-21 H07BQ-F
no changes
DIN EN 50525-2-21 H05GG(H2)-F
no changes
DIN EN 50525-2-21 H05BB-F
no changes
DIN EN 50525-2-21 H07BB-F
no changes
DIN ENDIN EN 50525-2-21 H05BN4-F
no relevant changes
DIN EN 50525-2-21 H07BN4-F, H07BN4-F multi core
no relevant changes
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
DIN EN 50525-2-22 H03RT-H
no changes
H05RR-H und H03V4V4-H withdrawn
----------------------------------------------------------------------------------------------------------------------------------------
DIN EN 50525-2-31 H05V-U/-R/-K
new: Cold impact test at -5 °C

DIN EN 50525-2-31 H07V-U/-R/-K
Cold impact test at -5 °C (new: -K)

DIN EN 50525-2-31 H05V2-U/-R/-K
new: Cold impact test at -5 °C

DIN EN 50525-2-31 H07V2-U/-R/-K
Cold impact test at -5 °C (new: -K)
----------------------------------------------------------------------------------------------------------------------------------------
DIN EN 50525-2-41 H05S-U/-K
no changes
DIN EN 50525-2-41 H03S-K
no changes
DIN EN 50525-2-41 H05SJ-U/-K
no changes
DIN ENDIN EN 50525-2-41 H05SS-K
no changes
----------------------------------------------------------------------------------------------------------------------------------------
DIN EN 50525-2-42 H07G-U/-R/-K
Cold impact test at -5 °C

DIN EN 50525-2-42 H05G-U/-K
Cold impact test at -5 °C
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
DIN EN 50525-2-51 H05VV5-F
The cable shall be marked with the code designation ``H05VV5-F``
Cold impact test at -5 °C

DIN EN 50525-2-51 H05VVC4V5-K
The cable shall be marked with the code designation ``H05VVC4V5-K``
Cold impact test at -5 °C
changed calculation procedure for cables which number of cores does not belong to the preferred
ones
----------------------------------------------------------------------------------------------------------------------------------------
DIN EN 50525-2-71 H03VH-Y
new: Cold impact test at -5 °C
----------------------------------------------------------------------------------------------------------------------------------------
DIN EN 50525-2-72 H03VH7H-F
Cold impact test at -5 °C
----------------------------------------------------------------------------------------------------------------------------------------
DIN EN 50525-2-81 H01N2-D/E
extension to 240 mm²
----------------------------------------------------------------------------------------------------------------------------------------
DIN EN 50525-2-82 H03RN-F
new: Cold bending test for the insulation at -35 °C

DIN EN 50525-2-82 H05RN(H2)-F
new: Cold bending test for the insulation at -35 °C
----------------------------------------------------------------------------------------------------------------------------------------
DIN EN 50525-2-83 H05SS-F; H05SST-F
The insulation shall be a single layer

DIN EN 50525-2-83 H05SSD3-K; H05SSD3T-K
The insulation shall be a single layer
-------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
DIN EN 50525-3-11 H03Z1Z1(H2)-F
Cold impact test at -5 °C

DIN EN 50525-3-11 H05Z1Z1(H2)-F
Cold impact test at -5 °C
Voltage test after bending test with 2000 V
----------------------------------------------------------------------------------------------------------------------------------------
DIN EN 50525-3-21 H07ZZ-F
new temperature for compatibility test: 7 d at 100 ± 2 °C (old: 80 ± 2 °C)
----------------------------------------------------------------------------------------------------------------------------------------
DIN EN 50525-3-31 H07Z1-U/-R
Cold impact test at -5 °C

DIN EN 50525-3-31 H07Z1-K
Cold impact test at -5 °C

DIN EN 50525-3-31 H07Z1-U/-R
Cold impact test at -5 °C

DIN EN 50525-3-31 H07Z1-K
Cold impact test at -5 °C
----------------------------------------------------------------------------------------------------------------------------------------
DIN EN 50525-3-41 H07Z-U/-R
no changes
DIN EN 50525-3-41 H07Z-K
no changes
DIN EN 50525-3-41 H05Z-U
no changes
DIN EN 50525-3-41 H05Z-K
no changes
----------------------------------------------------------------------------------------------------------------------------------------
举例： 以H03VV-F为例，需要进行的额外测试有：
cold impact at -5C( 旧标准为-15C)
增加non-compatibity test(旧标准没有此要求）
bending test
voltage test （2000V） after bending test（旧标准在bending test后没有voltage test 的要求）

虽然新标准尚未发布，为避免项目塞车，现在即可向VDE提出申请。

kevin7611 发表于 2012-5-4 07:40

又要换证了，真是麻烦啊。:L

maisie 发表于 2012-5-4 14:12

动作够快的啊，已经分享出来了，呵呵

caoqingquan 发表于 2012-5-7 11:48

连长好;P

邓永连 发表于 2012-5-7 11:57

是连姐，不是连长

heroqhl 发表于 2012-5-7 17:00

很好的信息，谢谢！:lol

mingjie32 发表于 2012-5-10 16:32

standard请参考
DIN EN 50525-1 http://bbs.angui.org/forum.php?mod=viewthread&tid=97592&highlight=50525
DIN EN 50525-2-11 http://bbs.angui.org/forum.php?mod=viewthread&tid=97590&highlight=50525
DIN EN 50525-2-12 http://bbs.angui.org/forum.php?mod=viewthread&tid=97338&highlight=50525

DIN EN 50525-1 Page 2 的 Date of application 已经注明日期

johnmark 发表于 2012-5-11 09:18

楼上的是好人啊

billma 发表于 2012-5-15 15:24

DIN EN 50525-2-21,DIN EN 50525-2-82有吗。

djc1030 发表于 2012-5-16 11:30

正需要呢,非常感谢!
页: [1] 2 3
查看完整版本: DIN EN 50525标准更新内容（草稿）