bujust 发表于 2012-2-14 16:52

UPS 电源认证！

公司的一个UPS需要做UL+CB， 今天问了UL了，他们说只能做UL，不能做CB。
超级郁闷中～～～
大家说下，还有这样的道理吗？？？

bujust 发表于 2012-2-14 16:54

补充问题，UPS做IEC62040标准就OK了吗？
还需要其他的吗？

ecmjunda 发表于 2012-2-14 17:25

:(学习经验了

329485466 发表于 2012-2-14 19:04

去北美须做UL1778的标准，去欧洲做IEC/EN62040就可以了
:)

bujust 发表于 2012-2-15 09:14

329485466 发表于 2012-2-14 19:04 static/image/common/back.gif
去北美须做UL1778的标准，去欧洲做IEC/EN62040就可以了

谢谢！ 了解。

329485466 发表于 2012-2-15 23:09

M.4 Overcharge conditions ----引直IEC62040-1-2008
If a measurement is needed to determine if a battery compartment complies with Clause M.2,
the battery charger shall be connected to a supply circuit adjusted to 106 % of nominal
voltage and then subjected to 7 h of overcharging using a fully charged battery. Any
operator-adjustable controls associated with the charger or charging circuit shall be adjusted
for the most severe charging rate.   想了解下106 % of nominal voltage 这个106%标称电压是指电池充电电压还是UPS的输入电压（或充电器的输入电压）
Exception 1: This requirement does not apply to a UPS to be used with a battery charger that
is not investigated with the UPS.
Exception 2: This requirement does not apply to a UPS provided with a regulating circuit
preventing an increase in battery charging current and voltage when the a.c. input voltage is
increased from rated value to 106 % of rated value.

kevin245 发表于 2012-10-23 17:11

感謝, 讓我長知識囉

贺小梅 发表于 2012-10-24 08:53

LZ，那你研究出来了没，究竟是否有这种说法？不能做CB？

zsgcyk 发表于 2012-10-25 16:36

经验啊，现在能加吗？

bujust 发表于 2012-10-29 15:18

UL 还是不可以直接做CB， 但是貌似其他的机构可以出CB。
页: [1] 2
查看完整版本: UPS 电源认证！