3C验厂时找不到型式试验报告是严重不符吗
请问3C验厂时找不到型式试验报告是严重不符吗？型式报告都找不到当然是严重问题了。 肯定是严重不符合，没有型式报告，如何校对一致性嘛~~ Normally, it should be used for the factory auditors during the factory audit, and it's that kind of inspection documents, so it's serious, but anyway, in China, everything could be discussed especially if you have good relationship with those auditors, so it should finally depend on the communication between you and the CCC factory auditor.
Finally, if you can not find out the CCC test report, then ask the CQC lab which's responsible for your projects, then ask them to provide a new test report for you and your company, anyway, that may need you to pay for this report... So for this case, I'd like to say here, CQC needs to improve the service, and not only provide the hard copy test report, but also provide the maintain service for e-version test reports, something like UL MyHome function, but I believe it can not be solved ina short run, especially in China.
I suggest that you should scan the CCC test report after you get the hard copy, even there are lots of pages need to be scanned, then put it in you local PC, that'll be very helpful for you to look into in the future... Andy.Yang 发表于 2012-1-11 22:13 static/image/common/back.gif
So for this case, I'd like to say here, CQC needs to improve the service, and not only provide the h ...
Agree with you keven2012 发表于 2012-1-11 22:34 static/image/common/back.gif
Agree with you
Only can say, hopefully.... 本帖最后由 在多的画面 于 2012-1-12 09:00 编辑
如果你能保证你们的产品和最初送样时保持一致，可以找审厂员要电子版。
也就是说可以不算严重不符合项；当然也可以算，为什么算，很简单就是审厂员心情不好:lol:lol:lol 找你们的测试实验室再要一份， 赶紧的！ 请问形式试验具体的都要试验那些项目呀？
