出口产品召回案例介绍（3）——饮水机（结构）
通报国Notifying country：塞浦路斯Cyprus产品Product：分类：电器
名称：饮水机
品牌：Domotec
型号：D6240
描述：白色饮水机，顶部装水桶。它有2个开关，分别控制加热和制冷。功率601W，电压220-240V，50Hz,中华人民共和国制造，CE、RoHS认证。
原产地：中国
Category: Electrical appliances
Product: Water dispenser
Brand: Domotec
Type/number of model: D6240
Description: White water dispenser fitted with a water bottle on top. It has two switches to switch on and off the heater or cooler of the device. Power: 601W, Voltage 220-240 volts, 50 Hz, made in P.R.C., Certificates CE, RoHS
Country of origin: China
危险Danger：
烫伤和触电伤害
产品有触电和烫伤的危险，当工作在过压时，塑料管连接处有蒸汽和水泄漏。
产品不符合低压电器指令（LVD）和相关欧洲标准EN60335。
Electric shock, burns and injuries
The product poses a risk of electric shock, burns and injuries because, when operated, excessive pressure was observed and the plastic tube joints were leaking steam and water. The product does not comply with the relevant European standard EN 60335
通报国采取措施：
当局下令禁售。
Measures adopted by notifying country：
Sales ban ordered by the authorities 哪里不合格，召回原因呢？ 案例摘自- Weekly overview report of RAPEX notifications -week 38 – 2009
您认为这是根据哪一个标准（特殊要求）、标准中哪一条、那一个试验来判定的？试验该如何做？ Clause 22.6
Compliance is checked by inspection and, in case of doubt, by the following test.Drops of coloured water solution are applied by a syringe to parts inside the appliance where leakage of a liquid could occur and affect electrical insulation. The appliance is in operation or at rest, whichever is the more unfavourable.After this test, inspection shall show that there is no trace of liquid on windings or insulation that could result in a reduction of creepage distances below the values specified in 29.2. 我认为是22.7：
22.7 Appliances containing liquid or gases in normal use or having steam-producing devices
shall incorporate adequate safeguards against the risk of excessive pressure.
Compliance is checked by inspection and, if necessary, by an appropriate test.
因为这里提出的“ risk of excessive pressure.”似乎和原判定一致。
只是这“an appropriate test.”该如何做呢？ 回复4楼,应该是22.6.我认为该案例的饮水机根本不会有压力产生,是一般的饮水机,故不用考滤过压危险.我们也有生产象案例的饮水机,GS报告中判NA. 根据背面，这个电器是压缩机型饮水机，铭牌真的有点问题,没有标制冷电流，及加热功率,没有冷媒种类及冷媒克数；气候类型ＳＴ／Ｔ也没标，.不符合60335-2-24, Clause 7.1 案例分析太简单了吧！ 触电，可能金属外壳接地不良或接地没有全部接到，或未装防松垫圈；烫伤可能开关按下的力没有达到标准规定要求，小孩用很小的力孔就能将热水笼头按下，造成烫伤，非正常漏水，可能硅胶没封好或硅胶管太差造成的。 这个召回理由太简单了吧。。
页:
[1]
2
