BS1363-1不可拆卸插头厂审所需接地电阻测试仪要求
我司拟购买此设备，拟编制检验文件，需要以下资料：1.依据标准和标准条款编号？
2.试验方法？
请BS兄弟姐妹支持！ 这不是很简单吗？标准就是BS1363-1，条文是10.1.1。实验方法自己看标准咯 非常感谢！
10.1.1 Compliance shall be checked by inspection and the following:
a) for metal parts insulated from live parts, by the test described in 15.1.3;
b) for metal parts connected to an earthing terminal or earthing plug pin, by the following test.
A current of 25 A ± 0.75 A, derived from an a.c. source having a no-load voltage not exceeding 12 V,is passed for 60 + 5 s between the remote end of the protective conductor of a 3-core flexible cord (cut to a length of 150 mm ± 5 mm measured from the nearest edge of the earthing pin) and the remote end of the earthing plug pin and any accessible metal part intended to be earthed, taking account of the following:
1) for non-rewirable plugs, the manufacturer’s connection is tested as supplied, with the flexible cord cut to a length of 150 mm ± 5 mm measured from the nearest edge of the earthing pin, precoiled flexible cords being extended before measurement.
the nearest edge of the earthing pin（接地插销的近边缘）是否按上图理解？
（因暂无不可拆插头，只能用此可拆插头代替） 应该是由接地銅腳的近端开始量，图中所示的是远端。 学习了，
这是入库检验（逐批检验）吗？还是确认检验（定期检验：半年或一年）？ 学习了，谢谢哦！ 把标准的原文搬上去吧。
页:
[1]
