请教各位高手，接线端子，尼龙扎带，电镀，有色金属需要通过什么认证？能否提供标准
请教各位高手，接线端子，尼龙扎带，电镀，有色金属需要通过什么认证？能否提供标准？我是新手不懂啊，多谢各位高手回答! 引用第0楼zhoupiyan于2007-07-23 14:03发表的 请教各位高手，接线端子，尼龙扎带，电镀，有色金属需要通过什么认证？能否提供标准？ :请教各位高手，接线端子，尼龙扎带，电镀，有色金属需要通过什么认证？能否提供标准？我是新手不懂啊，多谢各位高手回答!
在申请UL的应用中, 接线端子, 尼龙扎带是需要UL认证的
- 接线端子, 不知道你说的是哪一种. 有 Quick-connect terminals (UL310, CCN: RFWV)
- 尼龙扎带, 塑胶有UL即可 (CCN: QMFZ2).
其他, 我也不清楚, 期待朋友们分享经验. 接线端子, 尼龙扎带如果是IEC好象没有要求认证的。 非常感谢pwong03492 ，nellhu两个高手的答疑，多谢!接线端子是公控低压电器用的 出美国和加拿大的话, 尼龙扎带要UL或CSA认证
UL1565 Positioning Devices
This is the common CSA and UL Standard for positioning devices. It is the first edition of CSA C22.2 No.
18.5, and the fourth edition of UL 1565.
1 Scope
1.1 This standard applies to those metallic and nonmetallic devices used for positioning – which may
include bundling and securing – or to a limited extent supporting cable, wire, conduit, or tubing of a wiring
system in electrical installations, to reduce the risk of fire, electric shock, or injury to persons. This
standard applies to, but is not limited to, cable ties, cable tie mounting blocks, cable clamps, cable and
conduit clips, and non-raceway ducts.
1.2 These requirements do not apply to coated electrical sleeving, extruded insulating tubing, metallic or
nonmetallic raceways or woven flexible nonmetallic tubing (fiber loom), employed as mechanical
protection for insulated wires or equipment covered by other standards or requirements.
1.3 These requirements do not apply to any mechanical protection or electrical insulation that is provided
by these devices.
1.4 In Canada, the requirements in this standard generally address class of workmanship in accordance
with the Canadian Electrical Code Part 1, and where applicable, minor combustible components in the
National Building Code of Canada.
页:
[1]
