带风机的毛巾架做2-30标准19.2做几个状态
For appliances having a heated surface that supports the textiles, eight layers of textiles areused. For appliances in which the textiles are dried by a warm airflow, two layers of textiles
are placed on the heating element guard or over the air inlet if the heating unit is located
above the textiles.
The test is carried out with the textiles completely covering the guard or air inlet and then with
the textiles covering 80 % of the area of the guard or air inlet.
NOTE 101 Different positions of the textiles are taken into account.
Appliances incorporating a fan are also tested without the motor operating, the guard or air
inlet being uncovered.
Appliances in which the heating unit is located above the textiles are also tested with two
layers of textiles placed over the rails. The rails are raised by 50 mm above their normal
position or through the maximum distance allowed by the construction, whichever is less.
Wall-mounted appliances that are folded when stored are also tested in the folded position
without textiles
没有大神解答吗～～
页:
[1]
