测试小QE 发表于 2018-3-7 15:43

CE认证的家电，哪些部件需要列入CDF，有没有成文的技术规范

CE认证的家电，哪些部件需要列入CDF，有没有成文的技术规范？还是就是各个测试的工程师的自己判断？
最近检查了一个电磁炉，IGBT不在CDF里，工厂说测试公司没有要求把IGBT列入CDF，不会是忽悠我吧？
希望各位老哥解答下我的疑惑

baicaizfl 发表于 2018-3-7 17:54

4.7.2 The information to be included in the critical components and materials table shall be based on the following:
a) The CTL clarification: “A safety critical component can only be determined upon a preliminary examination/evaluation of the electrical diagram/design/construction. When the design of the product is such that a determined component, in case of failure, can compromise the safety aspect, this component is defined as “safety critical”.
b) Components, which have specific requirements in the end product standards.
c) Components, which have requirements in the National Standards included in the evaluation
d) Materials, which are critical to maintain compliance with the standard (such as corrosion requirements, flammability)
e) Professional judgment of the CBTL/NCB.
这是OD2020里摘取出来的，是对CDF要填哪些元器件的要求。IGBT应当归属于a或d的情况，属于关键元器件，需要列入到CDF中

测试小QE 发表于 2018-3-8 14:32

baicaizfl 发表于 2018-3-7 17:54
4.7.2 The information to be included in the critical components and materials table shall be based o ...

多谢解惑，我还需要学习

wongxx008 发表于 2018-3-12 11:04

CE还好点，有据可查。
CSA坑更多，直接说是根据工程师经验判断，看了中国和美国工程师的CSA报告，兼职是天壤之别:@

kevin245 发表于 2018-3-12 11:06

测试公司没有要求把IGBT列入CDF, 這樣沒什麼不好. 我們都是希望列的越少越好.
有時列很多項目, 還會去爭論不要列這麼多.

Leontios 发表于 2018-3-12 16:40

怎么没人继续发经验了？

小猫咪 发表于 2018-3-14 11:39

学习了。高手在民间

sky0805 发表于 2018-3-15 10:40

baicaizfl 发表于 2018-3-7 17:54
4.7.2 The information to be included in the critical components and materials table shall be based o ...

見解道地唷!
页: [1]
查看完整版本: CE认证的家电，哪些部件需要列入CDF，有没有成文的技术规范