测试小QE 发表于 2016-4-28 10:13

求教IEC 60335-1 2010 Clause 20.2 关于moving parts的测试指的问题

IEC 60335-1 2010 Clause 20.2里有这个一句话:Compliance is checked by inspection,by test of 21.1 and by applying a force not exceeding 5N by means of a test probe that is similar to probe B of IEC61032 but having a circulr stop face with a diameter of 50mm,instead of the non-circular face.
这个a test probe that is similar to probe B of IEC61032 but having a circulr stop face with a diameter of 50mm,instead of the non-circular face是test probe A吗？我查了IEC61032，还是不太明白

测试小QE 发表于 2016-4-28 10:21

感觉像是test probe 11

测试小QE 发表于 2016-5-4 17:13

我仔细读了一遍IEC 60335-1 2010，在clause 22.11找到了答案，是test probe 11

ylgc123 发表于 2016-5-5 10:52

没太看明白你的提的问题，
是指被替换的非圆面测试指是哪个测试值？
( a test probe that is similar to probe B of IEC61032)被替换成 having a circulr stop face with a diameter of 50mm。

测试手指还是B型的，只不过后面的限位面换成了50mm直径的圆柱体，另外这个章节和22.11的测试指甲没啥子关系吧？

测试小QE 发表于 2016-5-5 15:05

ylgc123 发表于 2016-5-5 10:52 static/image/common/back.gif
没太看明白你的提的问题，
是指被替换的非圆面测试指是哪个测试值？
( a test probe that is similar to...

好像没有你说的那种测试指，我只有往11号测试指上猜了
页: [1]
查看完整版本: 求教IEC 60335-1 2010 Clause 20.2 关于moving parts的测试指的问题