请问为何此类咖啡壶会有危险?
本帖最后由 leaphile 于 2015-4-13 01:57 编辑请问各位高工, 为何此类咖啡壶会有危险, 是根据哪一项来判不合格? 看完解释也不明白。谢谢
通报国: 塞浦路斯 Cyrpus
产品名称: 咖啡机 Coffee maker
咖啡机共有两部分, 第一部分是一个有盖及手柄的金属咖啡壶, 第二部分是有电源线的塑胶底。
Coffee maker consisting of two parts. The first part is a metallic coffee pot with a lid and a handle on the side. The second part is a plastic base with a plug cord on the side. Packaged in a cardboard box.
b. 品牌及型号: Elite BK3032A
c. 生产批号/条码: 5290656054860
b. 具体不合格项目：烧伤 Burns
当产品工作一段时间後, 咖啡壶被提起时, 壶内的液体可能会溢出而烫伤用户
此产品不符合低电压指令, 及相应欧洲标准 EN60335
In the event that the product is operated beyond a certain time, the pot could overflow when it has been lifted from the base. There is consequently a risk that the user may be scalded.
The product does not comply with the requirements of the Low Voltage Directive and the relevant European standard EN 60335.
强制措施: 市场下架
Compulsory measures: Withdrawal of the product from the market
案例摘自- Weekly overview report of RAPEX notifications Report 11 (Published on: 20/03/2015)
应该是15.2的倾斜测试不合格，pot的底部应该是金属的，与水平桌面20度倾斜的情况下，水会溢出 这个真没看出来， 本帖最后由 themaster 于 2015-4-13 09:34 编辑
抛开安规条款。找几个人操作一下（不能相互观察，建议隔离操作），看有无烫伤情况。当然你不能光找机灵的，笨手笨脚，粗心大意的也要找两个。毕竟就证明不安全而言，这个比安规条款更有说服力啊。 没有标最大刻度？ 貌似烧开水后，你拔壶盖倒水时水蒸汽可能会烫伤人啊。
本帖最后由 long0755 于 2015-4-14 16:09 编辑
。。。。。。。
IEC/EN 60335-2-19
7.1 Kettles shall have a level mark or other means to indicate when they are filled to rated capacity, unless they cannot be filled beyond their rated capacity. This indication shall be visible when the kettle is in the filling position. If the level mark is not self-evident, there shall be a reference to this mark on the outside of the kettle which shall be visible when the kettle is in its normal position of use.
7.12 Unless kettles are constructed so that a hazard cannot arise from boiling water being ejected, the instructions shall state that if the kettle is overfilled, boiling water may be ejected.
对照标准自己看。 本帖最后由 leaphile 于 2015-4-14 21:50 编辑
几年前见过类似的土耳其咖啡壶, 貌似真的没有刻度。
弱弱的问一下, 为何这类咖啡壶不加最大标志? 在三月上旬, 有5个同款的咖啡壶要退出市场。 这种结构的咖啡壶加刻度线有难度。
外壳不透明，刻度线加在外面不起作用，加在里面的话，又不易可见（使用环境的光线不一定很好，咖啡是有颜色的，很容易把刻度线遮挡）。所以这种不透明咖啡壶结构基本上过不了安规，除非另外加防溢出的结构。
页:
[1]
2
