在IEC 60335-2-9 2012版6.1标准里的红色字和删除横线内容是什么意思？？？
本帖最后由 oubjzs 于 2014-7-14 15:56 编辑各位前辈!这里想问一下IEC 60335-2-92012版6.1里，标准里很多条款都是涂上了红色字体。这是什么意思呢？
另外，第7章，很过关于表面温升超过90K的描述被涂上红色，同时划上删除横线。意思是贴Hot surfaces被禁止了吗？超过90K就不可以过了？
如：
7.1Addition:
The rated power input or rated current of induction hotplates shall also be marked.
Appliances intended to be partially immersed in water for cleaning shall be marked with the
maximum level of immersion and the substance of the following:
Do not immerse beyond this level.
Ifcookers,portable ovensandrotary grillshaveaccessible metal surfaces, other than
working surfaces, that have a temperature rise exceeding 90 K during the test of Clause 11,
theyIf appliances haveaccessible surfaces, for which temperature rise limits are specified
in Table 102 and for which the provisions of footnote b to Table 102 apply, then the appliance
shall be marked with symbolIEC 60417-5041(2002-10), the rules of ISO 3864-1 applying
except for the specified colours, or with the substance of the following:
CAUTION: Hot surfaces.
7.6Addition:
Caution, hot surface
谢谢指导！！！！
涂上红字是被修改后的内容 附上译文仅供参考
如果器具具有可接触表面，其温升限值由表102规定，并且应用表102所提供的注释b，那么这些表面…… 注意：高温表面
"对于带有第11章期间的温升超过90K的非工作用的易触及的金属表面的器具，其说明书中应包含下述内容：
器具工作期间，某些表面的温度很高。"
twtwx 发表于 2014-7-14 22:11 static/image/common/back.gif
涂上红字是被修改后的内容
谢谢你的解答，红色是被修改后的内容。
另外有些内容是红色，而且是被画上删除线的，请问这些又是什么意思呢？
就是删除 是修改的信息。每一份新标准，都可以关注的一下它的前言内容。
如下60335-2-9：2012前言：
The technical content is therefore identical to the base edition and its amendment and has been prepared for user convenience. A vertical line in the margin shows where the base publication has been modified by amendment 1. Additions and deletions are displayed in red, with deletions being struck through. liscsupor 发表于 2014-8-21 21:11 static/image/common/back.gif
是修改的信息。每一份新标准，都可以关注的一下它的前言内容。
如下60335-2-9：2012前言：
The technical ...
感谢前辈指点，谢谢！
页:
[1]
