谢申斌 发表于 2009-2-23 21:13

我也正在找电源线拉力测试标准

luqing_sz 发表于 2009-2-24 08:27

对于Y型连接,楼不不必考滤线芯位移1mm的规定,只需考滤电源线外皮2mm位移..
对于X型连接,还是需考滤线芯内移1mm及电源线外皮2mm位移.(25.12:After the test, the conductors shall not have moved by more than 1 mm in the terminals. )及25.15:During the tests, the cord shall not be damaged and shall show no appreciable strain at the terminals. The pull force is reapplied and the cord shall not be longitudinally displaced by more than 2 mm.

jeanie123456 发表于 2009-2-26 22:04

唉，公司产品有次就没有通过拉力测试，说不定就是认证公司用了最严的标准。

dlw331 发表于 2010-9-24 11:04

受台資的毒害，都是繁體字呀
页: 1 [2]
查看完整版本: 電源線拉力測試(IEC 60335-1 Clause 25.15)